1993 Ford Ranger SuperCab "remove transmission side cover" Questions

Ad

...transmission on 1994 ford ranger 4.0 Remove heat shield covering on passenger side of transmission. Pry heat shield from oil pan and then carefully slide it forward to expose vacuum diaphram. There's ...

Ad

...Remove the transmission-to-engine retaining bolts and washers. Remove the nuts and bolts attaching the transmission mount and damper to the crossmember. Remove the nuts and bolts attaching the ...

Ad

remove the manual transmission consolette.        Click image to see an enlarged view Fig. Instrument panel exploded view (zooming image link here)Disconnect the RCM

Question about Ford Ranger

1 Answer

...to the transmission. You will need to remove the instrument cluster and unscrew the end of the cable to remove it. If your cable is ok then the plastic gear inside your transmission may be ...

Question about Ford Ranger

1 Answer

...transmission in neutral. Remove the wheel and brake drum from the axle you want to remove. Place a catch basin under the differential and remove all the bolts on the rear cover of the differential. ...

...side, so crawl under the truck and have someone shift the linkage with the truck OFF and you should spot the fault. If all seems normal and you see the lever moving on the transmission, then either ...

Question about Ford Ranger

1 Answer

...remove any remaining slack on the belt. Make sure the transmission is in the Neutral position and the Parking brakes are engaged. Rotate the crankshaft two complete revolutions so that cylinder No.1 ...

Question about Ford Ranger

1 Answer

...remove two hoses and access cover. speedocable connects behind instrument panel and to the side of transmission. (electrical ones are easier, just a small component on the side of trans.) i think you ...

transmission you need to pull the boot cover off the shifter by removing the screws and pulling the rubber boot up to the shaft shift knob, next look at the shifter on the transmisson you will see a a

...Remove the transmission support to cradle nuts only. Refer to Transmission Mount Replacement . Raise the vehicle. Remove the front splash shield 5 bolts. Loosen the engine mount lower nuts. Refer to ...

Not finding what you are looking for?
1993 Ford Ranger SuperCab Logo

624 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...