1993 Ford Ranger SuperCab "oil pressure" Questions

Ad

oil pressure drop with engine getting hot engine gets hot, and oil pressure gauge drops when stopped at red light You'll want to remove the electrical oil pressure gauge and check the oil pressure

Ad

Question about Ford Ranger

1 Answer

oil pressure problem well our 2000 Ranger 4x4 overheated yesterday..we changed the thermostat. After that the oil pressure started fluctuating..we changed the oil and the oil filter. Now the oil ...

Ad

...oil pressure with a oil pressure gauge from the oil gallerys in the block. Determine if the oil pressure is adequate. Most likely its probably a bad gauge but if you used a oil pressure gauge and ...

Question about Ford Ranger

3 Answers

oil pressure problem well our 2000 Ranger 4x4 overheated yesterday..we changed the thermostat. After that the oil pressure started fluctuating..we changed the oil and the oil filter. Now the oil ...

Question about Ford Ranger

1 Answer

oil pressure gauge reads zero When I start the ranger on cold mornings the oil pressure gauge shows zero for about 5 to 10 minutes. I want to replace the sending unit but can't find it. Pictures would

...oil pressure gauge sender first. It might be the pump but often they wear down gradually. It might also be the pressure relief valve spring. Most likely it is the oil pick-up pipe in the sump. Take ...

Question about Ford Ranger

1 Answer

oil pressure slow to rise After my 2000 Ford Ranger sits for 10 -12 hours it takes 8 - 10 minutes to get the oil pressure up, any suggestions as to what causes this??? you need to try a external gauge

Question about Ford Ranger

1 Answer

...oil pressure? No. You have to lift the engine. The distributor has a gear on it. this is what drives the oil pump. Most times 99% the bearings are worn out causing low oil pressure. I have replaced ...

oil pressure sending unit and perform an oil pressure test with a mechanical gauge. If the mechanical gauge fluctuates the same way, suspect a worn or failing oil pump. If the gauge is stable, I would

...oil pressure in the lifter galley. Many people have seen evidence that these engines were originally designed for solid lifters and were retrofitted with hydraulics for the U.S. market. The oiling ...

Not finding what you are looking for?
1993 Ford Ranger SuperCab Logo

624 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...