1993 Ford Ranger SuperCab "2 1988" Questions

...1988 ford ranger truck runs fine until get warm, replaced both fuel filters, new tune up, and distributer cap and coil Some of these trucks had 2 fuel pumps. One in tank other in frame rail. Possible ...

Engine firing order diagram for a 1988 ford ranger xlt 4x4 2.9 1-3-4-2 being 1 is at 1:30 or so. Mine works fine now

1988 ford ranger You mean the ignition lock cylinder? Turn key on, then look under the column, near the cylinder, there is a small hole, take a small screwdriver or rod and find the small hole about 2

1988 ford ranger fuel pumps both come on for 2 seconds and go off.\r\nevery time i turn the key this happens. can i wire the pumps to a hot wire whenever the key is on they will run? the pumps should ...

...1988 ford ranger could coil cause it Assuming old-style setup (not sure when coil packs became standard), your task is to check that: 1. Battery power is on one lead of coil. 2. Other lead from coil ...

...1988 2.9 truck shakes until at high rpms in gears 123 has 150 000 miles it started doing the shake thing as i started in first but recently has gotten worse and has spread to gear 2 3 it stops when i ...

1988 ranger 2.9 no fuel pressure new pump 1988 ranger 2.9 i have no power to the new fuel pump. Jumped relay, pressure to rail. still no start.. vac feed fuel into plenom it runs..? no pump and no ...

...2 times in a 30 min drive. There is a small white button, not sure what it's called, that is supposed to reconnect the fuel after a collision. It is located by the passengers feet. Pressing it ...

...1988 Ranger custom 2.9L Ford 2 WD? The number on the differential is "AS396D 345758C14 What size rear wheel bearing do I use? The rear cover gasket is different for the two differentials. Both ...

1988 i THINK I NEED TO REPLACE A FUSE ON MY TRUCK. THE BRAKE LIGHTS ARE OUT, BUT THE TAIL LIGHTS ARE ON, ON BOTH SIDES, SEEMS LIKE MAYBE A FUSE NEEDS REPLACING, BUT NO MANUAL AND NO FUSE PANEL. I WENT