1990 Ford Bronco II "crank" Questions

Ad

my 1988 ford bronco II cranks up and runs great but when i shut it off it will not crank back up. it takes like 20-30 mins before it will crank up again. there is something getting hot and keeping it ...

Ad

Question about Ford Bronco II

1 Answer

...starter replacment. Get a shim kit for the starter. Disconnect the ignition so it won't start while cranking in the start mode. Start with the thinnest shim between the starter and block. Crank and ...

Ad

Question about Ford Bronco II

2 Answers

2.9 rough idle/lopes when LR/1st gr Slow to start, idles rough (misses) has new plugs, battery, starter, in tank fuel pump Presumably you mean slow cranking. Check for weak battery or bad starter. If ...

Question about Ford Bronco II

2 Answers

wont start it will crank over and battery,starter, cyllinoid and alternator are all new all fuses are good but it just wont start gas pump is new also it sounds like you have a problem with either ...

I have a 1990 Ford Bronco II that will crank, but will not start. It was running fine yesterday, but today will not start. spray starting fluid in the intake. if it starts it's fuel problem, if it ...

Question about Ford Bronco II

1 Answer

won't start Cranks and cranks, but will not start. Replaced starter, starter solenoid, reset inertia switch, both fuel pumps, fuel pump relays, ignition switches, checked fuses. Can someone please

...smokes fairly heavey from the engine. other times just the lights on the inside come on and it wont crank. HELP!! bad battery connection if it will not crank make sure you getting power to starter ...

Whats wrong with my 1984 ford bronco running rough? my truck will never turn on with first crank, i have to crank and crank and hold the gas for it to start and it has to heat up for about 10 minutes ...

Question about Ford Bronco II

1 Answer

...died. I waited for a while then the bronco then the car strated again. most of the time its the crank sensor doing this. it will die then restart after about 15 to 20 minutes, when it cools ...

Question about Ford Bronco II

1 Answer

my flex plate keeps brakeing at crank the flexplate may not be sitting flush against the crank, or the crank may be out of balance causing a vibration and breaking the flex plate. try turning the ...

Not finding what you are looking for?
1990 Ford Bronco II Logo

133 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...