2006 Dodge Dakota "ball joint" Questions

...ball joint nut the control arm on a 2003 Dodge Dakota 4WD? Castle nut that holds the lower ball joint to the knuckle. Tighten the ball stud nut on the ball stud to 60 ft. lbs. (81 Nm tighten the ball ...

...ball joint assembly I need to replace the upper and lower ball joints on my 1999 Dakota Sport (318 engine). I plan to purchase the bolt on ball joint assemblys but am not sure how to remove the OEM ...

wher can I find instructions on ball joint replacement info on ball joint replacement you can find it at any car dealership that sells that kind of car and they will let you look at it for free

...ball joint on a 2001 dodge dakota 4wd. They are the pressed in type. I have beat on this thing with everything I have to no avail. I wonder if maybe they aren't screw in instead of press in. I don't ...

...TO BE LEANNING TOWARDS EACH OTHER FROM THE TOP Most common problem is excess ball joint wear, it's best to have a mechanic look at it to confirm. It will probably need ball joint and an

wheel bearing or ball joint replacement what are the symptoms for each when worn out Wheel bearing is a humming sound and ball joint is a clunking especially over bumps.

...ball joint. That way if your center punch is a bit oof, you won't chew up the control arm hole. Use your replacement ball joint as a guide to the size needed. New ones bolt in. Good Luck you need a ...

ball joint off the control arm to replace the ball joint? there are three rivets, u have to drill them out or chisel them off, the new joint is then bolted to the control arm, u can also buy the whole

...ball joint? Do you need a press? Try loosening the retaining nut just a few threads, turn the steering so that you can firmly hit the area just below nut, while putting force down on ball joint. Try ...

...ball joint press, impact wrench, and air hammer makes things simple.) you will not be reusing any parts of the ball joints/tie rods so do not be afraid to use an impact wrench to break things free. I ...