2003 Chevrolet Tracker "small passing questions" Questions

Ad

Question about Chevrolet Tracker

1 Answer

...and I thought I knew too. The only thing I've been seeing under my car lately has been small oil spots. So, I present this question to you: how much does it cost to fix (and I know car ...

Ad

...very fast and then stops Hi Julio, You seem to have a problem with the cold start unit. This is a small piece of equipment fitted to the throttle body, usually below and in front of the surge tank.

Ad

...you no doubt know that already ,now a lot of heads have a central drilling in the middle with a small bolt in it and it may be possible to remove this and blow a airline through it to dislodge ...

...We have not seen it start again yet. I have been researching the internet and have found that a small drive gear in cluster panel maybe cracked. Do you think that he should try this. I have found

Question about Chevrolet Tracker

1 Answer

small amount of fuel pass just enough at a time to start the engine but not enough to keep it running;Fuel Pumpcould be going out ;Check to see if the engine is getting fire by putting a spark plug in

questions. *Not pins/bushings* The spring in my hinge keeps ejecting itself. I tried a new spring, pin and bushings just to end up with the same result. When the door opens beyond half way, the spring

where do i check transmission fluid in 2002 alero on the out put housing pass side small plug 11mm wrench remove while car idling on a level surface add correct fluid type until runs out of hole For ...

Question about Chevrolet Tracker

2 Answers

...to fix it plain and simple do it on a busy day or close to clsoing time where thy might over look a small problem :) ...

...one?thank you for your assistance. alan harris you can take apart the top section and blow out the small passage that's bellow the throttle

Question about Chevrolet Tracker

1 Answer

...small pin i think locking the encapsulating nut from backing off of the cylinder rod by passing through the cylinder rod. this pin looks like a rivet. does it need to be grinded flush or drilled and ...

Not finding what you are looking for?
2003 Chevrolet Tracker Logo

367 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...