2003 Chevrolet Tracker "lights dont put car reverse" Questions

...dont work I tryed to test the fuses, but im not sure if i needed to put my accessories on to test it? my car is 5 speed manual. Also not exactly sure which fuse is for back up lights... any idea? No ...

...lights dont work put new bulbs in but still dont work you might have a reverse switch fault check on the box to see if it is connecting to the gear leaver when you put it in reverse..if not then that ...

...lights dont come on when i put my vehicle into reverse my reverse lights dont come on. Check for voltage at the neutral safety switch if the bulbs are good.The switch also powers the backup light ...

lights dont work There is a reverse light switch in your gearshift on some cars/trucks that can go bad.. I would check the light bulbs, then the wiring back to your reverse lights, check to see if you

...lights dont come on how ever the bulbs are fine i dont know what the problem is can you help? There is a reverse switch that is on the transmission that engages when you put your gear selector in ...

...lights dont work..This car has 4 reverse lights. Left, right and two in the middle (near the plate number).When i put the car in reverse, only the middle reverse lights work. The left and right ...

...lights dont come on when i put it in reverse...bought new bulbs and all fuses are good...no idea whats wrong with it...any advice? COULD BE THE REVERSE LIGHT SWITCH INSIDE THE SHIFTER. GOOD LUCK. ...

lights dont work I have a 2003 pontiac grand am and when i put it in reverse the backup lights dont work. Bulbs are new. One day i accidentally tried to start it with out the clutch pushed in and when

...lights on my 75 dodge D200 dont come on, although the bulbs are good and the wiring is intact. i have been told about a switch, though i cant find it since i dont know where to look. it is an ...

lights dont work. have checked bulbs they are ok. any suggestions welcome Have you checked for voltage at the light socket with the bulbs removed? If no voltage, then you may have a bad reverse switch