2001 Chevrolet Cavalier "communication error" Questions

cd player reads error It will spin, and make a very faint beeping noise. It will show track one on the display screen, and then error. It does this to all my disks, and they aren't scratched. Anyway I

Warning lights won't shut off on dash on cavalier Warning lights won't shut off on dash on 04 cavalier after shutting off ignition, removing key, getting out and closing the door. this also d Recently

2004 cavalier 2.2L DOHC. The engine rotates but will not start. There is no current going to the fuel pump relay. The fuel pump, fuel filter, fuel pump relay, ignition coil module, crankshaft position

trac light is comin on what does this mean seems to be ok The car is OK. If you have the traction control (TC) warning pop up it means there is a fault in the traction control system . The traction ...

...Communication Bus Fault-Recieve Error Parking Aid Module REFER to Section 418-00 . U1900 CAN Communication Bus Fault-Recieve Error DSM REFER to Section 418-00 . U1900 CAN Communication Bus ...

...is a transmission communication error: poor communication to your transmission ECM / computer The UO105 is a fuel injection communication error: Poor communication to your fuel injector ECM/

...Communication Bus Fault-Receive Error RCM REPAIR all other DTCs first. CLEAR the DTCs. CYCLE the key OFF then ON and wait 10 seconds. REPEAT the self-test. If DTC U1900 is still present, REFER to ...

...Communication BUS Fault-Receive Error ABS Module REFER to Section 418-00 . U1900 CAN Communication BUS Fault-Receive Error Instrument Cluster REFER to Section 418-00 . U1900 CAN Communication BUS ...

Communication Bus Modules connected to the GMLAN serial data circuit monitor for serial data communications on the GMLAN network during normal vehicle operation. Operating information and commands are

...communication error on scan tool my link port is fine no bent pins wiring is good no shortage no corrosion...I have a gsr Lancer 4g93 doch turbo....project. I'm also looking at replacing cam angle ...