Question about Chevrolet Monte Carlo
...Caliber has a problem sometimes when I first go to turn it on, it will turn over but not start. It doesn eventually start but I'm a bit concerned that one day it won't. Any suggestions???? I ...
Question about Chevrolet Monte Carlo
ETC light came on. Car goes 15-20 mph. Let cool down and it works ok then does it again. Would throttle body need changed or possibly other part? Motor crank sensor
Question about Chevrolet Monte Carlo
caliber? Just need to know where the camshaft sensor is. Ty! There should be two sensors. They will be on the side Of the motor that the transmission is bolted to. The intake cam sensor will be on the
Question about Dodge Cars & Trucks
...caliber throttle motor, you turn the vehicle on but do not start the engine. the accelerator pedal is fully depressed for 10 seconds. at this stage, the test engine light will shift to blink slowly, ...
...caliber and chevy dealer check the wiring harness and stated that abs motor is good and all wire are good what can this problem be the chevy dealer doesn't know the problem. check fluid levels and if ...
Question about Dodge Cars & Trucks
...Caliber radiator fans are not turning on and the fuse is okay what would be my next step Check the relays under the hood. Either in fuse panel under hood or follow fan wires from fan and look for a ...
Question about Cars & Trucks
...Caliber 2007, has a engine light warning on, and the technicianscan the car so he told me has a code P1702 (System:Manufacturer/Specific P codes /Description:Primary) Secondary Oil Pressure / Sensor ...
Question about Dodge Cars & Trucks
...motor. Keeping this in view, where is the crankshaft sensor located on a 2007 Dodge Caliber? The Crankshaft Position Sensor is in the rear of the engine block near the transmission. If vehicle is All ...
Question about Chevrolet Monte Carlo
Caliber 2.0 DOHC no start, P000a, P000b. Low oil on dip stick. codes p000A refers to camshaft position sensor(CMP) actuator, intake /left/front bank 1---slow response===causes ---wiring---CMP actuator
46 questions posted
Usually answered in minutes!
605 Questions
554 Questions
577 Questions
528 Questions
428 Questions