2006 Mitsubishi Galant "remove" Questions

...TO ALL AIR FILTER ASSEMBLY TO GET TO STARTER. IF YOU HAVE ACTIVE AIR SUSPENSION SYSTEM YOU HAVE TO REMOVE THE AIR COMPRESSOR TO AIR SUSPENSION FIRST DISCONNECT REMOVE AIR COMPRESSOR ELECTRICAL ...

...components?2004?2005 Galant and 2004?2005 Lancer 2.4L engine Disconnect the negative battery cable. Remove the engine under cover. Remove the crankshaft damper pulley. Disconnect the control wiring ...

How do you replace the ceiling in a 1994 Mitsubishi Galant remove all pillar trim pcs.(2front,2center and 2 rear-they are held in by clips so they just pull off-be careful not to brake them)remove ...

...Galant PROPERLY RELIEVE THE FUEL SYSTEM PRESSURE.TURN OFF RADIO.DISCONNECT NEGATIVE BATTERY CABLE.REMOVE REAR SEAT CUSHION BY PULLING THE SEAT STOPPER OUTWARD AND LIFTING THE LOWER CUSHION ...

...have to "bump" the starter a time or two to get it turned into position where you can get at it. Remove tire. Remove brake caliper. Remove caliper mount(if applicable) Find bolt that will fit in ...

where are the spark plugs on a 2005 galant 2.4 REMOVE TOP ENGINE COVER,REMOVE CYLNDER HEAD CENTER COVER,YOUR WILL SEE IGNITION COILS SETS ON TOP OF SPARK PLUGS.ALL 4 SPARK PLUGS EACH, WILL HAVE A ...

...brake lightbulb to change it? everything looks bolted down or glued in place or welded shut. i can remove some cables but thats about it from the looks of it. can anyone help? First remove the 2 ...

need to change front rotors remove front wheels, remove brake caliper assembly, some rotors are removable at this point, they come right off once the brake caliper is removed..

...heater core located on a 2000 Galant? behind the glove box! Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.

How do you change the tail lights? First remove the 2 black plastic retainers holding the carpet in. Remove the carpet and underneath you will find 2 studs with plated nuts. Remove the nuts and remove