2005 Dodge Neon "replace camshaft" Questions

...Replace the camshaft position sensor as required Check the crankshaft position circuit as well Replace circuit wiring and/or connectors as required Diagnose/replace the PCM as required Hope helps. ...

Camshaft position sensor. How do I replace this sensor, can it be disconnected, the contacts cleaned and reinstalled? I am reading things like" Loosen screw attaching target magnet to rear of camshaft

...replace it. Removal & Installation 2.0L engine camshaft position sensor location 2.4L engine camshaft position sensor location 2.0L SOHC Engine To Remove: Before servicing the vehicle, refer to ...

...replace the CAM sensor on a 1996 dodge neon? it will be on the left hand side at the end of the valve cover on the head. Hi, my name is John I will do my best to assist you. To Remove Disconnect the ...

...camshaft position sensor. To change it you'll have to move a few hoses but its plan to see there on the left side of the engine...pretty easy remove and replace. Fixed my problem of car not going ...

...replace the camshaft sensor, the sensor may be going bad or the wire where it comes over the rear of the engine may be chaffing at the valve cover causing the lose of the signal to the ECM. I believe ...

...Replace the camshaft position sensor as required Check the crankshaft position circuit as well Replace circuit wiring and/or connectors as required Diagnose/replace the PCM as required Hope this is ...

2004 dodge neon sxt. chugs and almost quits it happens when taking out and at around 35 to 50mph. Replaced to camshaft sensor a couple of years ago when it was doing the same thing. I just replaced ...

...a camshaft position sensor on 2000 Dodge Neon its located at the end of the camshaft, (drivers end) at the cylinder head. easy to replace. once you have the new one in your hand, you will see

...Replace the camshaft position sensor as required Check the crankshaft position circuit as well Replace circuit wiring and/or connectors as required Diagnose/replace the PCM as requiredThanks. a po340 ...