2 3 misfire. coil has been replaced, plugs & fuel pressure are good, and cad converter has been dropped..was melted almost shut but now fixed. what do i check now? I would suspect a head gasket or
...change the timing belt.. thanks Ignition control module ? did you replace that ? Plus the PCM - engine computer triggers the ignition control module for spark control . 2004 Saturn Ion 2 2 Misfire ...
...coil module,plugs,plug boots,found service bulletin about high oil pressure,could this be problem? if so whats the fix? Not sure where you got that code but it almost sounds like you burnt a valve. ...
...2. I have changed the spark plugs, wires and the coil pack and still has the same problem. What do you suggest I do now? Check to make sure the fuel injector is working on that cylinder, check the ...
change the sensor. Disconnecting the negative(-) should reset the computer and allow the fuel/air mixture to return to default allowing the engine to start. P0130 - O2 Sensor Circuit Malfunction (Bank
...change positions of switch you should see a voltage drop or increase, if u do then the moter is bad...if u do not then replace the heater control unit. :) The speed control switch depends on a ...
...2 spark plug and two months later it's missing again. car shakes badly at morning start up sometimes check engine light flashes, but once it warms up it's fine. Driving I can tell ...
...Do a tune up change spark plugs, wires, air filter, pcv ,and fuel filter. Change the Sensor on top of the coil pack and that will fix the problem. #2 also try tune up. #3 Clean Fuel ...
...coil. after 2 min it smoked another coil. always no 7 ...
...2 coil packs in and it runs the same so I know they are not firing. I am getting voltage at the coil pack but I dont know if its enough, what is the voltage supposed to be at the coil pack (plug) and ...
741 questions posted
Usually answered in minutes!
987 Questions
731 Questions
699 Questions
696 Questions
696 Questions