2004 Ford Focus "replace ignition olds" Questions

...replace ignition coil on ford focus wagon se p, li { white-space: pre-wrap; } Things You'll Need: Adjustable wrench Philips screwdriver Paper clip Ignition switch Follow this simple steps Open the ...

...you can wiggle the key and tap it with a hammer to free it up,but it will still need to be

will inserting the wrong key in the ignition of a 2003 focus screew up the PATS? I replaced the key cylinder that had locked up. I inserted the wrong key (non PATS) The one for the doors. It turned ...

...replace ignition Will the key go in and out of the ignition? If you can take the key from the ignition, I would use WD40 and lubricate the ignition lock until it is almost overly lubricated and take ...

STARTER WILL NOT ACTIVATE REPLACED BATTERY,ALL DASH LIGHTS COME ON EVERYTHING ELSE WORKS EXCEPT WHEN TURNING KEY TO START ABSOLUTELY NOTHING.DASH LIGHTS STAY ON. ignition switch had been replaced in ...

...replace my ignition key. now wont start Did you get new key programmed? Disconnect battery cables for 15 min or so, then reconnect and turn key to "on" and let it sit like that for 10-15min.Turn key ...

...ignition. This happened to mine and the lock cylinder had to be replaced. Ford offers one that can be coded to your key for about $100.00 wholesale. Other places will sell you one with a new key but ...

put key into ignition and it will not turn My 2004 did this. I replaced the lock cylinder with the new and improved one from ford and had it coded to fit my old key. Common problem. $$$

...ignition cylinder needs to be replaced. I realize this is more costly than hitting it with a hammer, but at least your car will start again at some point in time. I recommend going to the dealer, ...

...Replace the spark plug wires. Check plugs, reset Gap. Could be bad ignition module, coil, crank sensor. Intermittent failures are hard to find, and can be just a loose connection. The good news is it ...