release tab on the Emergency brake cable reel. Or manually back off the manually adjusting lock nuts on the brake cable. You may have to work loose the rust in the pivot at the backing plate. Once you
emergency brake was released, the car won't go into 1st or reverse...it was sitting for 6 days with the brake on. The brake is probably stuck in place. From sitting for so long, the brake probably got
...or the wheel bearing has gone out. It might be the emergency brake locked up. Either way, it will require so investigation by a mechanic. Is your emergency brake completely released inside the
...emergency brake up, Detach the park brake lever boot from the park brake lever, Lift upward on the rear of the floor console finish panel to release the floor console finish panel clips ,disconnect ...
...Emergency brake needs thicker shoes. Old time front shoes had a long and short shoe with I believe the long shoe rearward. As some people had trouble obtaining the correct set of shoes, finding the ...
emergency brake can slacken and need readjustment over time and this is proably what happened in your case, as far as your vehicle hitting another vehicle while parked even though you were not driving
...the emergency brake is released. If it is, check the brake fluid level. If it still comes on get it serviced. Joe in the manual it says--ENGINE SYSTEMS FAULT WARNING LIGHT -don't know what it
...emergency brake is off. 1. Jack up the car and remove rear tires. 2. With a 13mm socket and ratchet remove the 4 bolts that are on the back of the hub assembly. (You will need an extension and a ...
...emergency brake cable hanging up and keeping the back brakes on. The other possibility is that the front calipers are stuck or sticking. Brake linings are made out of the same material as clutch ...
1,391 questions posted
Usually answered in minutes!
3,749 Questions
2,612 Questions
2,055 Questions
1,226 Questions
840 Questions