2004 Ford Escape "connect accelerator" Questions

Battery light flickers and occasionaly clicks while trying to sta Had battery checked and battery connection checked both ok. Also the battery light tends to flicker while under acceleration. Does not

...to be damaged and will need to be replaced, these are very expensive, the first step is to connect the vehicle to a diagnostic tool to see which cylinders are causing the misfire and then ...

...used, the day before with no problems. where do I look or what should I check first? The tip that connects the accelerator cable to your throttle for the cruise control may be broken. I have had ...

2002 Ford Escape slipped out of gear. While driving at 70 mph my 2002 Ford Escape suddenly slipped out of gear and started losing acceleration. Engine runs and sounds fine shift lever moves freely on ...

I have a 2004 Ford Escape XLT with a V6. . and the battery light flickers under acceleration. The battery and connection were testted and both were ok. Hello, If you have not put on a Serpetine belt ...

Already replaced new battery, new alternator, fuse, and pt connector - voltage sits at 12.9 running - system still not charging? It isn't a good idea to disconnect the battery while it is running as ...

My escape keeps misfiring on cylinder 6 and has another multiple misfire, i have to change the spark plugs seems like every other month and ive replaced the boots and it still misfires anyone have thi

I have a 2001 Ford F-350 V-10 cruise control stopped working I have a 2001 Ford F-350 V-10 and the cruise control has stopped working. The light does not come one either. I checked all fuses including

I have a 2003 Ford Escape. Since 3 months after i bought the car the check engine light has been on. The car has a rough idle and hesitates when accelerating. After the car has shifted gears and the ...

accelerator pedal position sensor (main) output terminal and ground terminal will increase according to the depression. Testing Connect a suitable scan tool to the diagnostic connector. Select APP1 or