...brake light is not working but directional light and tail light are working on my 1965 corvette. this may sound funny, but you have a bad turn signal switch, brake light power runs throuh the ...
Question about Ford Escape
...brake switch to rear brakes. If the brakes work and doesn't blow the fuse, Make the new wire permanent and route the wire properly. Just my opinion. I don't have wiring diagram for your model year. ...
Question about Ford Escape
...brake lights, not working 1965 mustang i replaced the switch and the fuse, and bulbs Probably either a bad ground (broken wire, rust) or a bad headlight switch. The brake light circuit goes from the ...
1965 ford mustang...rear turn signals, rear emerg flashers & brake lights not working. Are the rear bulbs OK? Is the ground good at the rear?are the sockets good? Are there tail lights and a ...
1965 corvette right rear brake light not working Want to sell it? Just run new wires to the left side. Since it works. If the plug is bad, you'll have to find one or solder the wires directly to the ...
BRAKE LIGHTS, OR TAIL LIGHTS WHAT COULD THE PROBLEM BE Your tail light sockets should have 3 wires, I believe. One for tail lights, one for brake lights and a ground. The ground should be black. Check
...brake pedal n atlast the wire connection check. Hope it works..:)) Check light circuit ground in trunk for corrosion. Clean as needed. Also, corroded lamp sockets inside the tail/brake lamp assembly ...
Question about Cars & Trucks
...1965 Pont LeMans and started blowing fuse when applying brakes,then disables trn gnls.Could something I did wrong cause this or is it a short in brake light circuit? There is black tube that your ten ...
what is the length of a 1965 lincoln continential 4 door 1965 Lincoln Continental A new grille and parking lights are mounted as a single unit in the front fenders and the lines of the new front ...
Question about Ford Cars & Trucks
...light and door open alarm comes on. After I changed the door latch assembley which fixed another problem,It still switches on when braking. I guess its a faulty connector or broken cable. To narrow ...
890 questions posted
Usually answered in minutes!
1,139 Questions
1,083 Questions
1,107 Questions
900 Questions
486 Questions