car stalls when i step on breakes.will restat but stalls out again i would look for an air leak from the manifold to the brake servo....it will be a vacuum leak....
Location of pcv valve on 2002 zx2? To the right and slightly lower than the exhaust manifold.
where to look for a vacum leak i have a vacum leak dont know where to look for one? the small rubber hoses from the back of the inlet manifold .
Map Sensor (Manifold Absolute Press.) I have a bad Map Sensor on my 03 zx2. Is this something I can change by myself? If so does anyone know where it is located? This is what it looks like "http://di1
I'm looking for a part that attaches to the intake to supply air to the engine The intake manifold is designed to supply air to the engine. What else would one want or need? It would help if you told ...
...it is full of coolant then find where the heater core hoses run into the car, just under the intake manifold there are two rubber hoses next to each other, and see if they get hot when the engine is ...
...it. Now the car has no power, idles ruff, has a knocking noise, and sounds like the exhaust manifold has a leak. All so tries to die at an idle in drive. Get yourself a compression tester and ...
...common cause for a rough idle, a bad spark plug could also be the cause. Spray down your intake manifold area with carb cleaner and see if the idle changes, don't get carried away, spray just a ...
...loose at the flange in front of the engine where the Catalytic converter bolts to the exhaust manifold. You don't have to take it all the way down, just 1/2" or so. You may have to take the
...on the front of the motor next to the header and goes to the back under the center of the intake manifold. Its hard to get to if its messed up. Have you done a tune up, plugs, wires, filter(air
207 questions posted
Usually answered in minutes!
215 Questions
10 Questions
