...dohc 3.0 engne i have a bad coil pack what steps do i need to do to change the coil pack CHECK TIMING BELT TO SEE IF IT IS MOVING. YOU CAN DO THIS BY PULLING BACK UPPER PART OF TIMING COVER AND HAVE ...
...DOHC (Tuarus) the engine code for bad coil on E comes on when it is very humid and rainy. engine runs rough. Is this cyl #5? Are 4,5,6 cyl in the back or front? # 5 is in the middle of the front. It ...
...DOHC, there is 6 individual coils (coil on plug) the coils mount on top of each spark plug. They're held in place with a bolt and have a wire connector that plugs into the top of the coil. Hope this ...
no spark 2002 ford taurus 3.0l dohc replaced coil pack, plugs, and wires. car wont start, no fire to plugs check the relay on the distributor
...Ford Taurus with a 3.0 DOHC. Has several misfire codes. Replaced coil still has misfire. can someone help me? Thanks, Troy have you replaced the plugs and wires, thats usually where the problem
how do i change the ignition coil on my ford taurus orrect answer I'll need to know which engine you have, you have three choices3.0L V6 DOHC3.0L V6 OHV3.4L V8 DOHC (SHO Only
Question about Ford Taurus
...it had several misfire codes replaced ignition coil Spark plug wires What engine? 3.0 OHV or 3.0 ...
...COIL FOR A 2008 FORD TAURUS MODEL 3.0 DOHC has six individual coils. One for each cylinder. you will see three in the front for the front three cylinders. The upper plenum will need to be removed to ...
...dohc. All of a sudden lost fire to right side of engine. Scanner says a,b,and c coil malfunction. What all van cause this problem? Sounds like a power supply problem to the coils. Trace the ...
...pl ugs and wires on 2003 taurus w/3.0 dohc and it shows misfire on number two cylinder.Any suggestions? If this vehicle has coil on plug ignition, then the coil is faulty and will need to be
1,790 questions posted
Usually answered in minutes!
2,347 Questions
2,262 Questions
2,120 Questions
1,869 Questions
1,431 Questions