2003 Ford Taurus "camshaft sensor problems" Questions

Ad

Question about Ford Taurus

2 Answers

...camshaft position sensor could be defective, the camshaft synchronizer (the part that took the place of the distributor on DIS engines) has failed, if you have recently had the camshaft synchronizer ...

Ad

Question about Ford Taurus

1 Answer

...sensor P0340 - Camshaft Position Sensor Circuit Malfunction This indicates that a problem was detected in the camshaft position sensor circuit. Since it says circuit, that means the problem could lie ...

Ad

Question about Ford Taurus

1 Answer

...the Camshaft Position Sensor.I looked up the codes and they say pretty much the samething. P0340FordCamshaft Position Sensor Circuit Malfunction P1336FordCrankshaft/Camshaft Sensor ...

...generated by the camshaft position sensor Possible Cause--- Cam Position Sensor Powertrain Control Module ETC,MAF,CKP Verify CMP is installed correctly You need a local repair shop to check it ...

Camshaft Position Sensor (CMP) SynchronizerYou can try this test - Unplug the CPS before starting the car, Take it for a test drive & see if the problem is still there, if it drives ok then it has

camshaft position sensor and see if concern is gone, if so, suspect cam sensor/synchronizer fault or incorrectly installed synchronizer. 4. Unplug the DPFE sensor and see if concern is resolved, if so

Question about Ford Taurus

1 Answer

...camshaft position sensor circuit. Could be a bad sensor, problem in wiring or in the pcm. First check wiring and connection at circuit to make sure no wires are burnt/damaged, You can check for ...

camshaft sensor and catalytic converter Check engine light is on and indicates camshaft sensor and catalytic converter.. How extesive are these repairs? Can I do this? Pricing? Sometimes one problem ...

...camshaft sensor synchronizer Non-Step Style - If you look inside the connector on the Camshaft Position Sensor; you are looking at the socket (female) side of a quick connect plug. For the non-step ...

from under the hood, then stop driving it. Check the Camshaft Position Sensor (also called the crankshaft angle sensor). This sounds like your problem but without the problem codes, it is just a guess

Not finding what you are looking for?
2003 Ford Taurus Logo

1,790 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2001 Ford Taurus
2001 Ford Taurus

2,262 Questions

2000 Ford Taurus
2000 Ford Taurus

2,121 Questions

2002 Ford Taurus
2002 Ford Taurus

1,869 Questions

1998 Ford Taurus
1998 Ford Taurus

1,431 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...