2003 Ford Taurus "brakes pedal goes floor" Questions

Ad

...have to bleed the lines or set your break peddel. Make sure the master cylinder is full of fluid. Bleed the brakes and if the pedal goes to the floor still you have a bad master cylinder. Good

Ad

...brakes a couple of times to get a firm brake pedal. The first time you push the pedal, it goes to the floor and only the left front brake is engaging. A quick pump or two and I have a firm pedal and ...

Ad

...brakes ok but sometimes pedal power asist seems to cut out vacuum leaks can make booster loose power assist. if pedal intermediately hard to push the booster might be bad. if the pedal goes to the ...

Question about Ford Taurus

1 Answer

...brakes feel fine with good pedal pressure then the next stop they'll go all the way to the floor. The next stop they're working again. I've checked the fluid and it's full. I'm thinking its the brake ...

...to brakes? What do you mean goes out?? If the hydraulic system fails the brake pedal gets soft and goes to the floor. If the ABs has an issue it can fail in several different ways. Need more ...

Question about Ford Taurus

1 Answer

...on a rock, but the brakes will still work to a small degree. The booster is more likely. If the pedal goes to the floor, you have air in the system, a blown brake hose, wheel cylinder, or

after every wheel, then adjust the rear brakes, and after that if pedal is low replace the master but you may just have air in the system, and make sure there are no leaks on any line. hope this helps

Question about Ford Taurus

2 Answers

...pedal goes down to the floor to make it stop check first the brake fluid reservoir to see if it is full, then bleed the brakes if the petal will not come up. Your leaking brake fluid look behind all ...

...brakes, after several pumps hold the pedal down as far as it will go and keep pressing to the floor as the other person loosens the bleeder valve.  Don't let off of the pedal before ...

brakes the pedal will go to the floor when there is a leak in the brake system or air is in the system due to lack of proper bleeding, when a major component is replaced; caliper, master cylinder etc.

Not finding what you are looking for?
2003 Ford Taurus Logo

1,790 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2001 Ford Taurus
2001 Ford Taurus

2,262 Questions

2000 Ford Taurus
2000 Ford Taurus

2,120 Questions

2002 Ford Taurus
2002 Ford Taurus

1,869 Questions

1998 Ford Taurus
1998 Ford Taurus

1,431 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...