2002 Ford Ranger Regular Cab "sending unit" Questions

...sending unit in the tank. One way to determine if its the guage or the sending unit is to ground the wire from the guage and it should peg out. If it doesnt then its the guage if it does then its the ...

...sending unit My gas gauge don't work and I bought a new fuel sending unit and now I need to know how to replace it The fuel sending unit is in the gas tank. You have to drop the tank to ...

...sending unit at the fuel tank, while someone is watching the fuel gauge inside the vehicle. 90% of the time (especially on Ford's) it's a faulty sending unit in the fuel tank, which is usually sold ...

...sending unit inside the gas tank, look under the truck and locate the fuel tank, look for wires going to the tank,the wires will lead to top of the tank, unplug connector and fuel gauge should go to ...

sending unit. The temperature sending unit should be easy to get to. depending on the motor, it is going to be a one wire connector going to it, most likely on the lower intake manifold. Once you find

...sending unit on a 1989 ford ranger 2.3L my gauge says my engine is cold all the time and i dont know where the temp sending unit is look for a small brass sender unit with normally 1 wire from it at ...

...sending unit could be jammed of your have a short in the harness. Check the harness first and pay attention to the connections, if there ok then it's the float on the sending unit on the gas tank. ...

...empty will need to check if the gauge works properly. and will need to check to see if sending unit is working. plus checking wires. most likely if it just stopped working the sending unit has

...gauge will go to full sometimes even when empty it will go back down ive already replaced the sending unit it could be a bad ground, poo wire cnnection or the new sending unit could possibly be

how to check sending unit on 96 ranger Which sending unit do you refer to, there are many to choose from