2002 Ford Crown Victoria "testing blower motor resistor saturn" Questions

Blower Motor on 2000 Saturn SL Blower motor does not work on any setting. Blower motor works fine directly connected to battery or in another Saturn. Blower resistor impedences test good. With blower ...

blower motor resistor to see how do i test the blower motor resistor to see if it is bad on a saturn l200 hard to teast but if u only hav a couple of the blower speeds chances hav it that the resistor

...blower motor quit working The blower motor would cut in and out and eventually quit all together. Have read people talk about the resistor. Can I test that? How can I tell what the real problem is? A ...

...blower motor resistor in 2009 saturn outlook? My 09 outlook has heat problem. Sometimes it works, sometimes it doesn't. This is true for the blower as well. Any suggestions what it could be? Some ...

...blower motor and there is no light, i have replaced the blower resistor and the fuses work. there is one relay that there is no power to and that is the run 3 relay. what to check for next?? were you ...

Blower Motor Issue Ginko, Thank you much for the respones. I haven't been able to find a "thermic switch". Does this switch go by another name as well? Also, where would the switch be located. Here is

...blower motor resistor located under the dash on the right side near the blower motor. Remove the panel under the dash to gain access. disconnect the connector to the resistor( its a four wire ...

Blower motor is good and bought new resister and still not blowing Having issues with my 2008 Saturn vue a/c blower. Bought new blower and resistor still not blowing There may be no power at the ...

Blower motor in saturn l200 "sometimes works" Ok heres the situation. the relay and fuse is good. didnt get around to testing the resistor. when the car sits for a bit it will run for a bit until the ...

...testing, Get a test light, and more importantly a digital volt/ohm meter. Check for power and ground to the blower at the connecter. If both not there, Ive had the blower bad, the resistor bad, the ...