remove and replace alternator Hello, Just follow these steps to remove and replace the alternator. You will need this tools, Serpentine belt tool, Battery wrench, Lug wrench, Floor jack, Jack stand, ...
...The next day the bulb I replaced had blown. Any Ideas why? Did you touch the bulb with your bare hands. Not all will do this but if the oils from your hand and get on the bulb, when the bulb heats ...
is the bottom idler pulley between a/c compressor and crank left hand threads to remove it ? It is right hand thread. So you need to turn the bolt counter clockwise to remove it.
Question about Ford Taurus
Is it possible to turn the shaft on the blend door actuator by hand when it is disconnected The shaft on the actuator should hot turn by hand but the shaft of the blend door inside the housing should
cannot install serpentine belt because their is too much tension make sure that is the right belt. If so, then you need to find the tensioner for the belt and use whatever size wrench that it takes ...
Where does # 1 spark plug go on the front or the back of 2000 Ford Taurus flex fuel? Ford numbers the cylinders on the V6 as follows: The right hand bank [or bank of cylinders closest to the firewall]
engine dying while started and fuel hand not working sometimes it will start and run for days and then it will die and the fuel hand will not work,and it will start after sitting ,sometimes hours ...
Icant teke it off a bolt of the crankshart i want to now if left hand it will be right handed
taurus wiper blade wont work drivers side pass side works , you can move it back and forth by hand Sounds like the pivot stud is stripped, or the linkage under the cowl is broke. You can take the arm ...
3,503 questions posted
Usually answered in minutes!
2,348 Questions
2,120 Questions
1,869 Questions
1,431 Questions
1,365 Questions