2001 Ford Taurus "connect front brake switch" Questions

Ad

Question about Ford Taurus

2 Answers

...brake and ignition switch connector. Disengage insulator retainer. Remove insulator. Remove 4 nuts and reinforcement below steering column. Remove 4 nuts securing steering column to instrument panel ...

Ad

Question about Ford Taurus

1 Answer

...brake lights or turn signals head lights and turns work on the front and i have parking lights all around and all fuses are good It is most likely your brake light switch. The wiring from the brake ...

Ad

Front and rear circuits differ in that the rear also doubles as the brake light. Any ideas? I'm thinking the steering column switch... Try pushing the Hazard switch on the Column several times and see

front brake Now my question is how do I fix this so that wen I connect the rear brake connector back keeping the light from staying on Check that the switch is closing fully when pedal is up. There is

Question about Ford Taurus

1 Answer

...brake line switches or something? Check to see if inadvertantly the connection to the actual pressure switch (one for front & the one for the rear) may have pulled loose at the switch. These are ...

...sorry. The signal light switch is connected to the brake lights so the front signal lights dont come on when you put the brakes on. It is most likely the problem. hard to replace too. Good

...front drivers side brake line I assume you have found a visual leak in the line or connection...Be sure to thoroughly soak both end connections with PB Blaster before tryting to loosen.  You ...

...front lights come on and brake lights.it is not bulb or fuse. its the switch located behind your brake pedal hooked to it take a light look behind brake pedal you will see switch with wires hooked to ...

...relays and brake light switch. 92 dodge dakota See is the turn signals working in the front if not the back. If they do work in the front, then its the connection to the back is no longer

...Connect battery negative cable. There is a plastic clip which holds the brake switch at a specific adjustment, quite often it gets hit accidentally. It may break or jam out of adjustment. It is just ...

Not finding what you are looking for?
2001 Ford Taurus Logo

3,503 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2000 Ford Taurus
2000 Ford Taurus

2,120 Questions

2002 Ford Taurus
2002 Ford Taurus

1,869 Questions

1998 Ford Taurus
1998 Ford Taurus

1,431 Questions

1996 Ford Taurus
1996 Ford Taurus

1,365 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...