plugs, MAF sensor, fuel and air filters, plug wires, cleaned IAC sensor, replace a bad PVC elbow to intake, etc.). My truck run better now but sometimes stalls when I come to a complete stop. My truck
Question about Ford Ranger
Can I repair a 1999 Ford Ranger,3.0 liter, 6 cylinder, Intake Manifold, two tubes leaking that connect to heater core hoses. Replace the Intake Manifold or repair the two tubes on the Intake Manifold ...
...and the chk. eng. light is on, I took the vehicle to a shop and they told me it was a leaky lower intake manifold, I want to know how I can test for a leaky intake manifold externally and
...that it really is running way to lean. This is usually caused by a vacuum leak. Make sure you intake hose from MAF sensor (air filter box) to intake is secured and has no leaks, then move on to ...
...on the front of the engine block. On the 6 cylinder engine, it's located near the front of the intake manifold. There should be three bolts, remove and thermostat should be underneath. pay ...
[email protected] ) Ok, i had this same problem. On the driver side of the engine right under the intake mainfold there is a vacuum hose comming off the bottom of the intake, then going to a switch.
where is the intake air temp senser 2002 ford ranger Airbox, or Intake Snorkel
1987 2 0 liter idles buts stalls when accelerated 1Inspecthere are the possiblilties FreshAir Intake Hose Clogged or Damaged FreshAir Intake Hose. 3InspectThrottle Position SensorFaulty or Incorrectly
how do i repair a cracked manifold on a ford ranger 2.0L with permatex Intake or exhaust? Really makes no difference. Nothing will hold on the exhaust due to the heat. Intake, best to replace it. ...
intake manifold runner bank 1 stuck open. Please help, is it a vaccuum tube, how do i check You can check by taking off the breather and covering the intake (smother it). If you have a leak it will ...
747 questions posted
Usually answered in minutes!
642 Questions
645 Questions
573 Questions
562 Questions
558 Questions