2000 Ford Ranger SuperCab "replacing thermostat 4 engine" Questions

...thermostat in a 2000 Ford Ranger with 4 cyl engine. I've drained the radiator and removed the upper radiator hose. I do not see the thermostat where the upper radiator hose goes into the engine - ...

4 Cyl 2.3 litre engine The engine temperature in my Ford Ranger would not rise, hence a very cold ride in October in Canada. I replaced the thermostat assembly. Sure enough the old assembly was broken

...thermostat facing in to the engine, just had to ask, check your fan clutch, with engine off spin fan with your hand, should only turn about 3/4 of a turn, if it just spins freely bad fan clutch ...

4" drive ratchet 10mm socket 8mm socket Flathead screwdriver (not pictured) Parts needed: Thermostat New coolant Now, look at the picture and you will see the proper way it needs to be installed ok? I

...4 cylinder. What is the trick to remove the thermostat housing in order to replace the thermostat? THANKS Just did this today on my 2000 4 cyl. It was a pain. First off drain the radiator. There is a ...

...thermostat. 4. Have a "cylinder leakage test" done at your repair shop. 5. Have the cooling system pressure tested. 6. Add coooling system ceaner to the system and drive for about 30mins. Next, ...

...replacing the thermostat housing unit and having issues with a radiator leak that would not stop my mechanic noticed a very small hole behind the water jacket which after running his hand in the area ...

...4 x 2, thermostat stuck and blown headgaskets, cylinder heads was overhauled and refitted after all that the engine sometimes has a little misfire and then looses power but as soon as you let it kick ...

...4 cyl. It was leaking out of the head gasket by the firewall, drove me nuts! Engine now being rebuilt. Is the vehicle over heating? I would advise you to start the vehicle cold and let it warm up, as ...

...thermostat--you will need to drain the cooling system before replacing the unit. Blow out the radiator core with compressed air from the engine side to remove bugs and other debris first. Hope this ...