2000 Ford Ranger SuperCab "gear" Questions

removing timing gears ford 300 six You have a timing chain or gear to gear (no chain) ? Can't see why the top gear wont come off (if it's a chain setup) Bottom gear can be split and removed with a ...

trans stuck in 4th gear shift lever sloppy can not engage any other gear bad transmission, I changed one just like it,first thought the clutch had locked up, but changed that and same ...

Gear missing tooth in front axel Can I easily replace the gear? If the broken gear is a ring or pinion gear (the large gears) It needs to be professionally rebuilt (requires dial indicators and torque

crankshaft alignment on 94 ford ranger? I can't find a reference point on the crankshaft gear for the timing belt, my truck will start, but the timing is severely off. HELP! Put the harmonic damper ...

slight grinding noise in 3rd gear pops out now wont engage ANY gear clutch feels normal shifter feels normal , 190,000 miles was about to need cluch still the original your teansmission is going to be

Stuck in 5th gear I have a 91 Ford Ranger ext cab. 2nd gear went out first then all gears went out. Sometimes clutch would fall to floor when pushed, but now clutch has good pressure. Cannot shift ...

when i chage gears its hard to go into gear and sometimes i have to turn engine off to put in to first gear or reverse The clutch is going out. the pressure plate is not releasing enough for gear ...

none of the gears will engage was driving my 1987 Ford ranger pickup when it acted like it slipped out of gear and then it wouldn't go anywhere, backward or forward. it has an automatic transmission. ...

...and rear drive axles for a 1985 Ford Ranger 4x4 The front differential takes 1.1 pints of hypoid gear oil, and the rear - if you have a 7.5" ring gear, takes 5 pints - if you have a 8.8" ring

Extended cab. How do I uncross gears? It's an old truck but I just got transmission basically rebuilt. Recently, my truck won't go in gear or come out of gear. I've tried to uncross them myself. I was