2000 Ford Excursion "know crank sensor bad" Questions

Ad

...crank over but not start and the theft light was blinking. I let it sit for a few a used a second key and it started. Could the original key be bad and caused a problem? I didn't know about the fuel ...

Ad

Question about Ford Excursion

1 Answer

crank sensor. Can you help?? its look like to me bad cks even if its new one its happen some time so change the cks and then reset the code and try have a good one dont forget let me know what's going

Ad

Question about Ford Excursion

1 Answer

...crank sensor it will solve your problem. BUT...Also know that a bad fuel pump can do exactly what you describe in your statement. Once the pump get hot it gets to acting stupid, but yet again so can ...

...other, you most likely have a bad crank sensor (spark), bad cam sensor (fuel), bad fuel pump if you don't have pressure, or a bad PCM. Probably need to get it checked out somewhere to know for

...know where the crank sensor is located? O2 sensor won't cause a no spark no start condition but the crank sensor will. most time bad crank sensor will not set a code if engine doesn't start. ...

sensor. Crank shaft sensor,cam sensor,bad battery and bad connection. There are hundreds of possible causes. Without knowing the fault codes if any, and/or conditions and details pertaining to when it

...know will not start. Have replace both the crank and cam positioning sensors. Turns over but will not fire, removed air cleaner and gave a shot of either - no difference. Does you fuel pump delivers ...

even one i cranked the engion over Check all the fuses. crank sensor,pcm does'nt know the engine is turning. check to see if you have 8volt to crank sensor when cranking.if you do,your sensor went bad

...crank no start would a knock sensor do it I already know the computer is bad but it ran for a while while that was bad A crank sensor can do it the best thing to do is put it on computer to make sure ...

Question about Ford Excursion

1 Answer

...know what year is but the crank position sensor is locate it behind crank pulley in order to have acces to the sensor you ne to remove the pulley first. Note when the crank sensor is bad there should ...

Not finding what you are looking for?
2000 Ford Excursion Logo

532 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...