...front drive shaft from the transfer case to the front differential. With the vehicle on 4 jack stands and the front drive shaft removed attempt to place the vehicle into 4 WD. You may have to start ...
...Wheel Drive (4WD), a flat on passenger's side, position the jack so that it cradles the front axle. For a flat on the driver's side, position the jack so that it fits into the notched area of the 4WD ...
front wheels will not spin when 4-wheel shift lever is engaged in any slection( high/low). The front drive shaft turns freely when transfer case is not engaged, is this normal? Thanks! Try to lock the
new owner how do i use 4 wheel drive i have a switch inside and I see the turn nobs on the front rims do i have to enganged both or just one. you have to engage both sides
4 wheel drive does not engage and the hubs stay locked ya might need a new transfer case or the front axle might need re-built
front hub to lock in to 4 wheel drive is locked and wont move. 2000 ford excursion v10 on one side only, is this a ford only part?? thanks This is common. the locks due tend to freeze up and need ...
...wheel drive? Depends on which one you have- there are typically 2 types, one mounted on tailshaft of transmission and most likely the one you have, one mounted on the rear end. Replacement is rather ...
...put universals in the front wheel axles in a 2000 ford excursion now we dont have 4 wheel drive its inbetween lock and auto how do we get it back to auto Return to the shop that just relaced the ...
...wheel and will not turn freely. Should the front drive shaft and front axel still turn? when 4wd is disengaged. It sounds like a problem with the drive shaft knuckle its a sealer unit and not ...
532 questions posted
Usually answered in minutes!
179 Questions
160 Questions
123 Questions
96 Questions
71 Questions
