Misfiring after replacement of spark plugs and wires If it wasn't misfiring before. Make sure you have the proper gap on the spark plugs. Make sure you have the wires connected in the correct order. ...
what needs to be done when changing the spark plugs first of all mark the plug wires from front to back, before removing them, 1,2,3,4,ect. after that remove wires, use spark plug socket to remove ...
...is bad? I'm getting spark on all cylinders but it looks redish and is jumping to the side of the plugs not to the electrode. Thanks! The small difference in ohms does not sound like an issue. But ...
Engine turns over but will not start, hard on old battery Sounds a faulty Ignition coil. Pull #1 spark plug, put the plug wire back on the plug. With some insulated pliers hold the plug to the metal ...
What tools would I use to change spark plugs and wires? you will need a 5/8 size spark plug socket, with a 3/8" ratchet, and a 4 - 6" extenstion to remove the plugs, and the wires can be pulled off at
...over slowly but doesn t seem to want to run on all cylinders First remove and inspect the spark plugs If one is coated with black carbon replace it and if the car has not had a tune up in recent ...
...come on, the best guess is that this could be as simple as a misfire due to old or defective spark plugs and wires, or even possibly just a loose spark plug wire. Check that all the spark plug wires ...
engine will not start after driving through puddle Pull off spark plug wire and take out spark plug any hole will do. Have an assist to turn over engine and then watch the spark plug to see if it has ...
ei have a firing problem no fire getting to the spark plug You most likely have a bad spark plug wire. That is the cheapest fix for the problem. One way to test the plug wire is to take a pair of ...
753 questions posted
Usually answered in minutes!
2,142 Questions
1,335 Questions
1,118 Questions
957 Questions
841 Questions