Kia sephia stripped spark plug how to repair Here's a video to watch. Rethreading Blown Spark Plug Hole Yourself not a job for a diy unless you have a lot of mechanical and fitting knowledge the plug ...
Question about Ford Windstar
...to the water jacket and will just keep giving you hassles.Remember, lots of grease on the tap when rethreading the hole, only do a turn or two at a tme before removing it, cleaning the grease and ...
...rethread a sparkplug hole on a 2000 mercury sable dohc You best bet is to buy a re tap tool that is designed to re thread spark plugs. It will go down past into the cyl then widen and you tap pulling ...
...metal as the car accelerated. I had it checked out at the acura dealership and it revealed a broken ignition coil which when they tried to replace it with a test coil the spark plug would not tighten ...
...rethread the hole. Personally, I'd find the next size plug, then drill and tap the new hole. Afterwards, elevate on side of the car so any fluids inside run out and use brake cleaner to make sure you ...
Question about Cars & Trucks
...metal to fall inside the cylinder it will reck the engine .You may have to remove the head to save it retape then heil coil and always be careful replaceing #4 plug You are going to have to play with ...
...with the oil pan is a stripped plug and threading. Please help. Any ideas are appreciated. Would rethreading be only a bandaid fix? you can go to an auto parts store and get a rubber plug kit that ...
...RETHREAD INSERTS.BUT MOST OF THE TIME THE CYLINDER HAS TO BE REMOVE.BECAUSE PLUG HOLE IN A TOUGH SPOT TO GET TO ALSO YOU WILL GET LITTLE METAL FILINGS IN CYLINDER BORE TRYING TO REPLACE SPARK PLUG ...
...So I took it back now it is still doing the same thing. My shop said the clinder was stripped so he rethreaded it and drilled the resudue out, now my motor is broke what happened. and this is the ...
...gone in head.So itthe garage you need,they should rethread for not to much.It is done with a tap and die set,which you could buy,but being where it is you could not stop metal going into engine. ...
1,790 questions posted
Usually answered in minutes!
1,830 Questions
1,838 Questions
1,503 Questions
1,032 Questions
600 Questions