1999 Ford Expedition "windshield wiper return start" Questions

windshield and the wipers started to go. I immediately turned them off, brushed snow off and then turned wipers on again. They still move fine, but they do not return to their resting spot below. They

My windshield wipers will not return to their starting position automatically without using the windshield wiper switch. the park circuit in the wiper motor is faulty, easier to just replace the motor

wiper is off it will stop in the middle of the windshield and stay there, when i shut the car off and push it back down to the bottom of the winshield once started it will return back to the center of

return to the horizontal positon This is an easy fix. Likely ice got on your windshield and froze your wipers to the glass then when turned on moved out of position. Take the cover off the base of the

windshield wiper wants to work, but does not. Had a heavy snow and remotely started the car. Forgot the wipers were on. When I noticed it, the Driver side was off the windshield, against the door post

...Windshield wiper arms are about to loose shaft teeth. Each arm is holded by a 1/2 " nut. Loose it and take them out. Check for damages, usually on the windshield wiper arms, the shaft is designed to ...

windshield wipers stuck at 12 o'clock position started engine and then turned wipers on to remove snow, they went to 12 o'clock position and did not return. removed snow by hand and turned wipers back

...windshield wiper lever forward to spray washer fluid on the rear window. The lever returns to its starting position when released. The windshield washer reservoir is used for the windshield and the ...

...windshield wiper do not turn off. After turning off ign and waiting for 10 minutes the wipers will return to the part position when the car is started. Not a wiper motor problem. Looking to find out ...

...they are turned off they stop 1/3 way up the windshield... take the vents off the truck and wiper arms then losen the 1/2 bolt or nut turn the arm tile the wipers is down then tighten the nut or ...