1999 Ford Expedition "fuel vent" Questions

...Vent valve * Repair open, short, or resistance problem in control circuit * Repair open, or short, or resistance problem in power circuit * Replace PCM I hope help with this (remember to rate and ...

...fuel tank vacuum. Also, a DTC P0446 indicates a vent control malfunction. Possible causes: EVAP canister purge outlet tube (EVAP canister purge valve to EVAP canister) blockages or kinks. EVAP ...

...fuel vent hose is critical to fuel system operation. Note the routing of the fuel vent hose at this time. Remove the two bolts and the fuel tank front and rear support straps. Lower the front of the ...

...System component failure,such as a fuel tank vent. You should have a Mil Lamp light on dash and codes to get close to the issue Need professional help, don't need a dealer,unless you have deep ...

...fuel tank 2 vent? Hi, did you mean P0445? EVAP system codes are in the 400 range of OBD2 code set. 445 indicates a short in the purge valve solenoid. Disconnect the cable and check the impedance of ...

started to burn or burnt something stuck in there like leaves or plastic etc. check your lines and fuels, make sure nothing's leaking or dried up

...fuel tank Vacuum. You can have a loose fuelcap or a hole in the venting system for your gas tank. It is even possible that the gas tank has a hole in it. Or a solenoid is not opening and venting. ...

You'll just be venting the gas tank to the outside air. If the gas tank is not venting at all, the fuel pump will eventually not be able to pump fuel to the injectors unless you take the gas cap off

...vent air into the gas tank, can be a collapsed tank or a blown fuel pump. It is not worth the risk. The easiest thing to do is vent the tank to the open air after the charcoal canister, as all boats, ...

...tightly closed. May also have a leak. One common thing that could happen, **** cuts the filler neck to steal fuel. Maybe a vent/evap hose somewhere between the tank, evap canister and motor is