...wont lock The actuator that locks the door is probably worn out. I would simply lock it manually . If you desire to , you can replace the actuator by removing the interior trim panel and drilling the ...
Question about Cars & Trucks
...wont cut the threads. Then find that size drill bit in a reverse bit and drill into the set screw. Normally the bit will grab the set screw when you drill it and the set screw will just back out of ...
Question about Cars & Trucks
...drill into a hole in the arm of a chair that was improperly drilled? The screw wont go in It's crooked & I don't want to wait months for a replacement. Thank you. PS husband is handy. its your ...
Question about Ford Crown Victoria
...nuts. Do I have to remove front bumper? ThHank you try using self tapping screws so you dont have to remove it, you can drill pilot holes if the screw wont go thru easy, and you dont need a ...
...wont open from inside or outside My beetle will not open from the inside or outside, it was working will a little jiggle of the door handle, now it does not work at all. The car is unlocked and ive ...
drill bit , and replace with nuts, bolts and lock tight so they wont ever come loose. It is real simple when you get there you will see. GOOD LUCK, AND YOU CAN DO IT DO NOT PAY ANYONE. LOL............
Question about Cars & Trucks
Thanks guys! Got the square head screwdriver. Screw is stripped. Repairman unable to extract it either Suggestions? If an extractor wont pull it then you have two choices, grind it off or drill it out
...wont close Stays open Pop out the ashtray. Remove the ashtray assembly (the housing). if you flip the ashtray over and look at the bottom you can see a small spot where a piece of plastic has broken ...
...still wont come out. how do i go about getting the cylinder out? u have 2 pull the stering wheel off has a screw that has 2 come out 2 slide it out good luck u will have 2 get a stering wheel ...
...wont turn. ok you will need a puller to remove the stering wheel once you have it off you will see a phillups screw holding the ignition in. once the screw is out you will have to play with it but it ...
429 questions posted
Usually answered in minutes!
454 Questions
486 Questions
323 Questions
297 Questions
294 Questions