1997 Ford Explorer AWD "range 2 head" Questions

Ad

Question about Cars & Trucks

1 Answer

...2 remotes? Are they both exhibiting short range? Maybe bad remote if 1 is OK and the other is not. 3. Try this to extend range: hold remote under your chin and touching your chin while pressing the ...

Ad

Question about Suzuki Cars & Trucks

1 Answer

...2.0L VIN 5, 6th digit?) Before installing the cylinder head to the cylinder block, turn the crankshaft and position key within the specified range (30-90°) in the counterclockwise direction from the ...

Ad

...2 per cylinder head, 4 per car. Part LR014372, however a Bremi 31491073 is the same ... Which is bank one? - Range Rovers Forum Jun 14, 2016 Can the Cranck Position Sensor be installed DIY ? What to ...

Question about Ford Explorer

1 Answer

...lateral adjustment -1- and height adjustment -2- until the correct setting is achieved.NOTE: Where equipped, ensure equal movement/function of headlights during automatic headlight range

...range of the plug with the 2 being the coldest to 11 being the hottest the heat range is specified to the engine performance and condition so it is necessary to know if the engine is lawn mower , ...

...2- Bad water pump not turning as the belt driving. 3- Bad radiator is clogging up causing coolant stagnant even good thermostat and good water pump Since you don't have heater, there maybe a serious ...

...on cylinder 1 and 2, 80 PSI and 60 PSI respectively, are not within the normal range and indicate low compression. The wet compression test results are also not within the normal range, 95 PSI and ...

Question about Ford Explorer

2 Answers

...2" nut that holds the throttle arm to the sensor. Very easy to replace. Thanks. Taran_2005 described the location of the Transaxle Range Sensor (AKA Neutral Safety Switch, Digital Transmission Range ...

...range traveled! you request if for reverse light switch yes? wiring and bulbs not the issue! the switch is located behind and down drivers side head light 1999 model is under battery box must remove ...

...head gasket number 2 was showing a fault and stripped it down and machined both heads. They wantede to charge me another $3000 and I said you take care of this. Long story short I have since taken it ...

Not finding what you are looking for?
1997 Ford Explorer AWD Logo

1,614 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

1996 Ford Explorer
1996 Ford Explorer

2,307 Questions

1999 Ford Explorer
1999 Ford Explorer

2,248 Questions

2002 Ford Explorer
2002 Ford Explorer

2,302 Questions

2004 Ford Explorer
2004 Ford Explorer

1,513 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...