1997 Ford Explorer AWD "noise cluncking" Questions

it makes a loud noise when i shift the gear lever If it's a loud "CLUNCK!" Then you likely have a bad u-joint in your driveline. If that's the case it is usually a relativley inexpensive fix, but be ...

...nothing wrong with the axel or tie rod end, what else could it be??????? Without knowing where the noise is coming from, you won't have much luck fixing it.  If it happens when you are ...

hi my vw golf 2000 1.6 make a cluncking noise when reverse hi my vw golf 2000 1.6 make a cluncking noise when put reverse. no problems in other gears. any advice. check engine to transmission mount.

cluncking noise coming from the frontwheels cluncking noise coming from the front wheels suspension,when going over a slight bump in the road. Have the suspension parts checked on your car, probably a

my rear axle is making a loud noise What kind of noise is it making. Is it a whining noise or cluncking noise

Cluncking noise while driving The noise doesn't appear to be the shocks, but seems to be coming from the front area not the rear wheels. Has anyone had similar complaints? check your sway bar end ...

...to right and makes noise I have a Mitsubishi L200, when I apply the brakes it pulls to right and makes a cluncking noise. your brakes are not adjusted or the brake pads are worn out. check and

When I start , makes a clunck sound then after running theres a loud rattling noise what could be wrong with it ? It depends on where the noise is coming from. Could be any engine part such as a valve

cluncking noise from front end when pulling away / braking hard and some times when turning cluncking noise from front drive / wheels when pulling away or braking hard or going over speed bumps etc. ...

replaced struts on 1999 ford taurus but when turn left or hit a bump makes a clunck noise sometimes Sounds like somthing is loose. Identify the corner and pull that unit apart. If you find no loosness