1997 Ford Explorer AWD "hesitation reverse drive" Questions

...hesitation then a clunk when I hit the gas from a stop. Any Idea what this is? Hi, Usually a "clunk" when you put it in drive or reverse, might indicate a U-joint needing replaced. Hope this

...Before it went completely out, there seemed a hesitation before the truck engaged into reverse gear. I checked the transmission fluid and it was fine. Help...Tnx Reverse clutches are burnt

...reverse or drive it hesitate s then goes in gear,,what good it be? When you say hesitation do you mean the engine will rev but the transmission won't engage Check the transmission fluid level. check ...

1994 Ranger XL automatic: when you put in reverse and go from reverse to drive it hesitates before truck will move in drive. forward clutch could be burned, is fluid level right?

...into reverse the transmission will hesitate then shift really hard into reverse from park and drive You will have to have the solenoid body replaced in the tranny and have the PCM

...Drive is slow to engage, reverse is good. This morning engine hesitated right at stopping, as if the trans was not releasing / slipping enough. I am thinking about getting a used trans from a junk ...

...hesitation when you first put it in reverse I'm assuming that the dealer checked the basics (fluid level, etc) there is no way even for you to check the fluid level. Also I suggest some possible ...

...drive there is no longer any hesitations, but now it will not reverse when put in reverse and when in nutral and you do not press the gas it goes backwards and when you press the gas it goes forward. ...

hesitation when going from reverse to drive When I start my car and go into reverse and then drive, it hesitates almost like it isn't sure it wants to go. After a few seconds it does drive normal, and

reverse to drive. It's more prevelant when i'm reversing out my driveway which has a slight incline. Any thoughts? Let try a better octane for the fuel ...try using 93 octane.. let me know in 3 days..