...cruise control I have a 2004 Ford Explorer (Sport, maybe?). I recently ran into a strange situation. When I was in a 35 mph, 10-mile construction zone at midnight in Pennsylvania, I set the cruise ...
...Cruise Control I have intermittent cruise control problem. I will hit on, set and the green dash light will come on and stay on (the other posts I saw just flashed) but the cruise does not engage ...
...cruise control uses? Cruise control doesn't work. I replaced the cruise control switch on top of the master cylinder. Tested the two wires for the switch and found that only one have electric ...
cruise control was turned on. Left the cruise control off for two months, and the problem stopped. I used the cruise control last week and the engine cut out again. I had a complete diagnostic done on
...CRUISE CONTROL ON THESE.. UN PLUG YOUR CRUISE CONTROL AND REPLACE THE FUSE. USE A 12 VOLT TEST LIGHT TO FIND THE FUSE . THESE TRUCK WOULD START ON FIRE, EVERY BUDDY WAS STINKING A BIGGER FUSE TO TRY ...
...cruise control stopped working Out of the blue my 03 ford explorer cruise control stopped working. cannot locate which fuse to check. handbook not fully understandable. If I don't remember bad, check ...
Cruise Control recall, there were additional wiring problems caused by the modification of the Cruise Control. These problems included yours and Brake lights working independent of the brakes. Contact
...cruise control is not working. Could it have some something to do with the hit or could my brakes need to be replaced? Thanks on top of your brake master cylender under the hood (where you put in ...
cruise control no longer works Have the brake pressure switch tested at your local auto store. It is mounted at the base of the brake master cylinder. Just loosen it with a 9/16 wrench, take it out, ...
1,614 questions posted
Usually answered in minutes!
2,998 Questions
2,307 Questions
2,248 Questions
2,302 Questions
1,513 Questions