1997 Ford Explorer AWD "change crank sensor" Questions

you don't have a strong spark then either the ig. module - the PCM or the wiring to the crank sensor is bad.A bad crank sensor will definitely cause a no start- but you have already changed that..

...flow sensor ? Did you hook it up to a diagnostic scan tool to check engine data PID'S ? Hunt an guessing doesn't work ..... Test crank an cam sensors ! How to test cam or crank sensor hall effect ...

.... Still wont crank, No fuel is getting thru the Injectors. check for a problem cam shaft censor as well as a crank position sensor as both are required to be operational for the ECM to start the ...

...crank sensor. assumed fuse and relay are good, using 12v light tester locate the fuel pump connectors and connect pos and neg terminal and have someone turn engine over and see is you getting any ...

crank sensor it sends information to the pcm telling it you are trying to start the engine it then sends a signal to the injectors to spray fuel but if the crank sensor is bad then the pcm doesnt know

Have 2002 Ford Explorer. Wouldn't crank, changed plugs and did tune-up, replaced fuel filter. Ran fine few days then wouldn't start again. Replaced battery, store said I had bad cell. Cranked ...

truck still wont crank set timing and changed sensors weve bought a new timing chain new sensors and a new relay switch its a new fuel pump and still all it does is spin freely The starter ...

...crank. As the engine cranks and the crankshaft position sensor detects rotation and reports it to the PCM, the check engine light should go out. If it stays on, the PCM isn't getting input from the ...

...crank sensor cam sensor & coil. it just stopped starting after my wife came home no sign of problem no engine light Take the E.D.I.S. to a parts store and have it tested. I would bet that has ...

crank it and when going down the highway it won't accel I can push the accelerator all the way down and it won't accelerate. I've changed plugs, fuel filter, no change.It won't go over