1997 Ford Explorer AWD "camshaft timing marks sprocket" Questions

Ad

Timing is done using special tools to hold the crank at top center and a tool to hold each camshaft in position. the cam sprockets are not pinned to the cams. there are also dummy tensioners installed

Ad

Question about Ford Explorer

1 Answer

...Camshaft and timing, Timing chain, TIMING CHAIN, Explorer, Mountaineer, Rear - 4.0L SOHC - 4.0L SOHC $57.36 Engine, Camshaft and timing, Chain guide, CHAIN GUIDE, Explorer, Mountaineer, Jackshaft To ...

Ad

Question about Ford Explorer

1 Answer

...camshaft Timing belt tensioner and spring positions Timing belt routing and timing mark locations Apply rotating force in the opposite direction to the front camshaft sprocket (radiator side) to ...

...camshaft with the timing mark on the sprocket aligned with the silver link then install a new camshaft sprocket bolt finger tight NOTE: It is not necessary to align the sprocket-to-camshaft offset ...

Question about Ford Explorer

1 Answer

camshaft timing mark. Balance shaft bearing caps Install the balance shaft bearing caps in their original locations. Follow the tightening sequence as shown in the illustration. Tighten bolts to 89 in

Question about Ford Explorer

1 Answer

...camshaft sprockets timing marks. CAUTION Do not turn the camshaft sprockets with the timing belt removed. The valves heads will contact each other causing the valve stems to bend. Remove the lower ...

Question about Ford Explorer

2 Answers

...Camshaft sprocket timing alignment pins. J-39579, Camshaft sprocket wrench. CAUTIONS: The timing chain on the 1996 LD9 (VIN T) Twin Cam Engine is not to be replaced with the timing chain from any ...

...camshaft sprocket timing mark should align with the generator bracket timing mark and the front camshaft sprocket timing mark should align with the inner timing belt cover timing mark. If the belt is ...

Question about Ford Explorer

2 Answers

...timing chain over the camshaft sprocket and then around the crankshaft sprocket. Make sure that the marks on the two sprockets are in alignment (see illustration). Lubricate the thrust surface with ...

...camshaft covrsRemove front coverRemove or fully retract all three timing chain tensionersRemove oil pumpPrimary and secondary chain guides should remain in place.  Rotate crankshaft until ...

Not finding what you are looking for?
1997 Ford Explorer AWD Logo

1,614 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

1996 Ford Explorer
1996 Ford Explorer

2,307 Questions

1999 Ford Explorer
1999 Ford Explorer

2,248 Questions

2002 Ford Explorer
2002 Ford Explorer

2,302 Questions

2004 Ford Explorer
2004 Ford Explorer

1,513 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...