1997 Ford Expedition "replace 2 radiator hoses" Questions

...Replace the thermostat. If they are hot, check to see if both heater core hoses are hot ( 2 5/8 in black hoses heading into the firewall). If one side is hot and one side is cold, replace the heater ...

...replace the radiator, but was told the lower raditor hose doesn't come connected, like when it was originally installed. Any thoughts on what to fix and how? If you're running it without a thermostat ...

...replace the radiator cap, shut off the engine and wait 15 to 20 minutes to let the engine cool. Once the thermostat opens, lightly grab the upper radiator hose to feel for air pockets. You will feel ...

...replace a rad cap until it actually becomes a problem but its the cheapest of the options. Hoses are easy enough to figure out. Let the vehicle heat up and see if they squeeze shut. Wtaer pump can be ...

...replace the bad core. Good luck and keep me posted, be glad to know your expedition is running 100% again. There are 4 hoses from the engine side going into the fire wall. If you can identify the 2 ...

2 wheel drive) blows some heat but not much. I just replaced the thermostat and notice that the replaced one was not stuck open (replaced it anyway). Problem still exists. Any ideas? Someone said that

...2. your heater core is bad and needs replaced. Unless you know what you are doing I would highly suggest taking to dealer for heater core replacement. The dash and steering colum has to be removed to ...

...2 times of having to buy many anti-freeze liquid i realized it was an ongoing thing. so i just parked it and havn't moved it since then. the battery is dead now but after winter passes i'm going to ...

replace heater core 1999 expedition Heater Core 1. Disconnect the battery ground cable 2. Drain the engine coolant. 3. Remove the instrumental panel. 4. If equipped with the 5.4L 4V engine, remove the

...usually located from top hose of radiator to engine follow hose leads to a housing which has 2 bolts on it remove bolts , remove old thermostat, replace and make sure new gasket in place and bolt ...