1997 Ford Expedition "locking hubs work" Questions

...locking hubs. There's supposed to be a lock ring holding on the cap/ cover that's remaovable with snap ring pliers, but don't see one. I see the groove at the base of the cap, but no ring, just a ...

...locking hubs are stuck locked try putting it back in four backing up a little bit put it in neutral and take it off 4wd and back up again if this doesnt work you will need to replace the hubs in the ...

...locking hubs and they are the most likely problem. To find out for sure you need to use a chain or strap strong enough to fasten to a tree or some other object that will not move lock in the 4wd and ...

...hubs won't release Hi there I am a mechanical technician engineer I fix the things normal mechanic cant! I fix mechanical and electric problem no matter what it is the problem with it!!!I I am very ...

had brakes when parked, replaced front rotors, pads, turned rotors, replaced brake lines no rear brakes replaced hubs,shoes wheel cyc, lines master cylinder, booster and bleed.bypassed abs system. ...

Brake line burst 1999 ford expedition Can anyone please tell me what size brake line and fittings I will need to replace rear brake lines?.... Thanks Which brake line are you talking about?. The metal

...locking/unlocking of the front hubs with a vacuum controlled solenoid. Here is copy of the page in owners manual If equipped with the Control Trac 4x4 System, and 4L (4x4 LOW) is selected while the ...

...locking hubs. Switch and transfer case all work.4X4 not engaging. Do the locking hubs bypass the actuator and my locking hubs are bad or it still could be the actuator?From what I was told is the ...

...or any other problems that i have found where do i look to fix the auto lock problem does it have auto locking hubs or manual hub on it manual it not going to work untill u get out and lock the ...

...locking.. When I lock the drivers side hub in, you can't hear any motion in the hub. Any ideas Hubs do quit working. Jack both front wheels off of the ground and lock the hubs but leave the transfer ...