1997 Ford Expedition "belt tensioner broke" Questions

the hole for the rachet broke how else can we reduce tension to get the belt back on Click here to see how to get belt on.

...need battery to run just to start. CHECK ALTERNATORS FUSES AND THE ALTERNATOR WIRES MAKE SURE THEY ARE NOT BROKE OR DAMAGE.ALSO MAKE SURE DRIVE BELT NOT LOOSE OR SLIPPING.DUE TO A BAD BELT

...belt tensioner broke I had my timing belt replaced at a dealer and they did not change the tensioner. As a result, the tensioner belt broke....i can get the tensioner replcaed, is there anything I ...

belt broke off and the tensioner and serpentine belt fell off. it is the second time this has happened is 3 days, new belt was installed 2006 chev uplander 3.5 engine Nobody has a direct answer the OP

...belt, now what?? broke bolt on tensioner pully while trying to replace belt! what now?? was this the bolt in center of the tensioner pulley? if so you will need to remove and replace the tensioner ...

...broke on our 2005 Chevy Equinox and I'm going to replace it but, I'm not sure how to release the tension on the tensioner to put the new belt on. It's the 3.4L 6 cyl AWD. Get a 3/8s drive rachet put ...

...won't stay on, keeps jumping off. Hi Daniel,Sounds like your belt tensioner is bad and not keeping proper tension on belt,Here is a picture of the belt tensioner,and here's your belt

...belt tension then release lock pin in tensioner and check that marks on tensioner align up if not turn water pump to get correct. some times this then causes the seal on the water pump to fail if its ...

...belt replacement and tensioner replacement the belt broke and after much difficulty we found the right one and hopefully the right diagram but now the tension piece broke ...

...belt tensioner broke and I was wondering if there was some way to bypass it because I have to change out my alternator You replace whatever broke You obviously haven't thought out your question ,as ...