...side of the steering wheel). The hazard light circuit is a double-pole single-throw circuit that gangs the right and left turn signal circuits into one and then activates the front and rear
...should be stored in the EMS. Some engine management systems will then default to multi-port or "gang-fire" injector operation. The camshaft position sensor signal is required to sequence the ...
disconnected wire going from the column switch to the light or a bad switch. Locate the wire in the gang plug under the dash on the column and check continuity between there and the bulb contact. Make
...Codes (DTCs) should be stored in the PCM. Some PCM systems will then default to multi-port or "gang-fire" injector operation. The camshaft position sensor signal is required to sequence the ...
324 questions posted
Usually answered in minutes!
907 Questions
705 Questions
546 Questions
442 Questions
465 Questions