1996 Ford Explorer "fuse break lights" Questions

...fuse for the break lights or could both bulbs could have burned out at the same time? there will be a fuse for the brake lights.if the fuse is not listed start checking all fuses one at a time.if you ...

...break light on gate works replaced lights, fuses, multifunction switch and checked for grounds Have you checked the stop lamp isolation relay on the engine compartment fuse box? I think that could be ...

...the break filliment goes bad it causes the blinker to flash very rapidly. 100% the bulb. Change it and all will be good again. P.S. if it were a fuse none of the break lights or blinkers would

...have an owners manual to check the fuses if its brake lights under the break pedal theres a small box to replace. if not break lights give me year make model and ill tell you where to check for ...

...break lights and fan went out and its not a bad fuse what else could it be THERES FUSES I BELIEVE IN THE ENIGNE COMPARTMENT AND IN INSIDE THE CAB. ON OR UNDER THE DASH. THE BREAK LIGHTS AND A/C ARE ...

break, & SW they did not shut off tried pulling some other fuses, still nothing. So i pulled the 60amp fuse for the fuse box thy still stayed on.So i pulled out both taillights no water pulled on some

...Break? I checked the Bulbs they are good, and no fuse's are blow or burnt out! Need quick answer on how to fix this? please so I can get to work with out being pulled over! change the brake light ...

...break pedal depressed. Fuse #13 is ok. Check the brake pedal switch that is located behind the brake pedal arm. There should be an open contact switch that operates the lights when the switch is ...

...fuse as the loose broken wire hits the brake pedel arm. Test the break pedal switch first if the third eye doesesnt work either. no power with a test light the fuse is blown or the wire broke ( the ...

break light on ford explorer stopped working, fuses are fine, bulbs are good, replaced break switch still no lights What year explorer ?