1996 Ford Explorer "ac heater switch wires" Questions

...heater/ac blower motor We have a 1995 Ford Explorer Limited. The blower for the heater/ac will not turn off, even with the key out of the ignition. I cannot seem to find any associate relay or other ...

...i check? could the blower motor resistor gone bad? how can you check it? or could the AC controls in my dash went bad? blower relay or resistor bad.also the AC and HEATER control switch could be

...heater/ac not working - I thought it was the blower motor so I replaced it - it is doing what it did before - there is a clicking noise on the driver front behind the glovebox. The blower for the ...

heater blows hot air even when it is turned off also my ac wont work I just repaired one with this problem. The selector knob for heat/cold was cracked inside where it slides onto the stub that sticks

...heater box as it swings from open to close. If not, insect for a vacuum leak or a shorted motor in the servo, repair the leak or replace the servo motor. can't get power to the ac cluch from the ...

...Heater/Defrost side, and I can get AC like air coming out, and the compressor kicks. Is this my dash control switch just going bad? Below, I've pasted instructions for the Control Cable adjustment. ...

...heater ac fan only blows on high speed Check the heater control switch,,,,,and the number of wires at the heater motor....Some motors have more than one winding...in which case there will be three or ...

...AC, black/tan wire goes direct from fuse to "heater mode select switch" (an on-off switch), and then a yellow/brown wire to blower switch. If it has AC, the black/tan wire from fuse goes to the "A/C ...

blower wire from heater AC control assembly. Blower motor came on. Is my heater AC control bad? If you got the motor to run, then whatever feeds that motor electricity is the culprit. Check the switch

ac/heater fan switch problem on a 2006 jeep commander The fan switch on the ac / heater on a 2006 jeep commander only works on high speed. how can I fix it? next to the fan motor there should be a ...