...order for coil pack, 1994 ford explorer,4.0 thanks! V8 or V6 Cyl 1 thru3 or 4 ---front to back --pass side Cyl 4 thru 6 --or 5 thru 8 in case of V8 --driver side V6 1-4-2-5-3-6 V8 ...
6 cyl or 4.0L 6 cyl? Drive Belt Tensioner, Automatic Removal and Installation Remove drive belt (8620) as described in this section. Remove drive belt tensioner retainer bolt and drive belt tensioner
oil sending uint where is it at oil send uint Need to know if you have a 4 cyl or 6 cyl and the exact engine size. The sensor is in different a location for each one.
...6 cyl, 8 cyl or 4WD, so i'll give you a link where you can check the engine you have. Scroll down the page to Explorer and click on the engine you have... ...
firing order for 1998 ford explorer 6 cyl 1-4-2-5-3-6
...6 cyl. and 8 cyl. engines are divided into 2 Banks, standing in front of the Engine, the Bank 1 is the side where the #1 spark plug is (on V6 Ford Engines is on the PASSENGER SIDE). Bank 2 is on the ...
...6-cyl Engine Code [E] SOHC Engine Oil Grade 1......API* All TEMPS......5W-30 Engine, with filter..........4.7 liters 1999 FORD TRUCKS EXPLORER 5.0L 8-cyl Engine Code [P] Engine Oil Grade 1......API* ...
senser How many 02 senser on a 2000 ford explorer 6 cyl. sho. there are two, they are in front of the cats.
...6 cyl Cannot locate the PCV Valve to replace it pcv is located at rear of valve cover on drivers side.to remove turn counterclockwise then pull.be very careful because there are 2 small lock tabs to ...
...idle 1998 ford explorer 6 cyl code p1502 speed senser looking for the location of the speed senser it was a PO 1505 code idles speed control wiring problom broken wire in the wire harnes running ...
3,523 questions posted
Usually answered in minutes!
2,998 Questions
2,248 Questions
2,302 Questions
1,513 Questions
1,369 Questions