1995 Ford Thunderbird "replacing valve seals 4" Questions

...valve(kind of a pain to get to) It is on the top of the block close to the fire wall next to the intake(elbow shaped 4 inch tube with TPS) I believe that they are 10mm. space back EGR 1/4 inch with ...

...valve seat in #4 cylinder on a 1997 Ford Escort LX 2.0 through a mechanic. You can not just replace a valve seat on a 97 ford escort . Is a valve bent ? If it leaking you van replace valve and seal . ...

...cover Gaskets and seals How many labor hours to replace the valve cover gaskets, and valve seals??? .5 for the 4 cyl. and its 3.6 for the 6 cyl. engine. This is according to the Chilton Labor

...spark plug tubes on 95 honda accord 4 cyl engine u have to take off tthe valve cover and pull out old tube seals that are in the valve cover and replace them with new ones and a new valve cove r ...

...valve seals 1- disconnect battery 2- remove valve cover 3- remove timing cover 4- set engine on top dead center #1cylinder 5- remove timing belt ( mark direction if re-using belt) 6- remove camshaft ...

...seals to check. easiest is the valve cover seal. Number and remove the 4 wires going into your spark plugs. remove 4 nuts holding the cover and replace seal. Next easiest is the distributor O-ring. ...

...valve cover gasket 7. All other seals in timing area and cover. i would do what you have plus ..front seal..oil pan gasket ...valve cover gasket.your thinking right.. whole lot easier to do before ...

...Valve Cover Gasket Set,yours seals will be part of it Look at a picture on NAPA.com etc Spark plug tube seals 2.5L 2002 Nissan Called the auto parts stores they all claimed they could get the seals, ...

...Valve Seals Replaced now smokes much worse I had a burnt exhaust valve on my 3E 93 Tercel. Sent the head in to machine shop, they machined head and replaced 4 exh valves and all valve seals with ...

valve stem seals. An engine compression test may help find it, but a cylinder leak-down test is a more precise way to find where compression is being lost. If compression is good, you just may need to