...power steering box on a 89 hilux? Open the hood and check the level of the power-steering fluid by removing the power-steering reservoir cap. Add the correct fluid recommended in your owner's manual ...
power steering fluid, it was empty. Looks like it was leaking on the garage floor, but didn't notice as van is there when I'm there. Put 16 oz of power steering fluid it, but the level
...Power steering runs out of fluid - I just had the power steering pump replaced because the sensor for fluid loss came on and the pump had a crack in it... I thought the fluid reserve tank was leaking ...
...power steering pump? please advise me thankyou. It could be the pump, or you could also be low on power steering fluid. First off, check the level of the fluid and make sure it's adequate. Next, you ...
...power steering reservior03 tacoma prerunner Hello Loren Russell, Great question. Bleeding is for closed hydraulic systems... the air space at the top of the fluid tank is open... and air escapes the ...
Question about Cars & Trucks
...power steering pump now its pushing fluid out of the top of the pump too much fluid in the reservoir ? the fluid level should only be to the bottom mark on the dipstick when cold , and it rises up as ...
...power steering cooler can't allow air into the brake system. Two different fluid systems. Your F250 has it's brake assist powered by the power steering pump. Instead of using a vacuum assist it uses ...
...power steering fluid pump has gone out. Before your wheel became stiff, did you ever have problems with the steering wheel shaking after you got up to a certain speed on the freeway? Did it ever seem ...
Question about Ford Mustang
...power steering pump sends the fluid to and returns from there. Something is wrong for it to jerk like that. There must be some undue pressure for it to push the cap up-something like a blockage, ...
power steering fluid, can well the rubber seals in the brake lines. The mineral oil in these fluids can affect the composition of the rubber in the brake line. C) The master cylinder push rod could be
819 questions posted
Usually answered in minutes!
706 Questions
694 Questions
653 Questions
617 Questions
433 Questions