1994 Ford Aerostar Extended "remove steering wheel" Questions

Ad

...remove the steering wheel, this requires a special steering wheel puller tool and that you disarm the airbag system before you start the work, to do this disconnect the battery negative cable for 1/2 ...

Ad

Question about Ford Aerostar

2 Answers

remove the hose(s) from the steering box first and have a container to catch the fluid that wil drain out of the reservoir and hoses. Refill the reservoir and turn the steering wheel back and forth to

Ad

Question about Ford Aerostar

3 Answers

...remove the black box, 2 screws. wire brush the points where the mounting bracket comes in contact with the frame. also clean the 2 bolts and washers, down to bare metal. This is a problem of ...

Question about Ford Aerostar

2 Answers

...Remove tie rod ends, remove steering knuckle bolt/bolts, remove lines, remove bolts holding rack. If you need to put your old tie rod ends into new assy. count number of threads, will need

Question about Ford Aerostar

1 Answer

...steering cylinder and the wheel hub with a ball joint. im not sure about the other side it is enclosed in gromet and is a ballinside a pined i believe i remove the pin and nt it off? im not sure what ...

Question about Ford Aerostar

1 Answer

...pull the steering wheel to do it? check under the dash where shift linkage connects to shift cable will be two #30 torx bolts which have probably worked loose you do not have to remove wheel easy ...

...steering wheel. pull the cover off the column, there are 2 or 4 nuts that hold the column up to the dash, remove them and let the column lay on the seat- u should disconnect your battery before doing ...

steering wheel and remove the loc plate with a tool and look for the screw that holds ignition cyl in the housing remove it and pull the key switch out! however if it's (THE) ignition switch under the

...that attaches somewhere beneath the clockspring inside the steering wheel. Can anyone help? That wire if it is black and pink goes to the igntion tumbler. chime. remove the tumbler to

Question about Ford Aerostar

1 Answer

remove the crimpedcollar & just replace the hose with Power Steering Grade Hose& a Clamp used for fuel injection, so it won't bite into the rubberA totally damaged aluminum tube would have

Not finding what you are looking for?
1994 Ford Aerostar Extended Logo

263 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...